Matters needing attention when using blower

First of all, during the use of the blower, the sensitivity and oil level of the thermometer should be checked regularly, and the oil level of the bearing box should be controlled within the specified allowable range. The bearing seat of e-type gearbox should be inspected regularly (once a quarter), cleaned and refilled with lubricating oil to prevent bearing burning out.



Secondly, if the blower finds that the flow rate is too large to meet the use requirements, or the flow rate is very small in a short time, it can be adjusted by throttling device. In the process of driving, stopping or running the blower, if any abnormality is found, it should be checked immediately.



Third, in addition to changing the lubricating oil after each disassembly and maintenance, the blower should also change the lubricating oil regularly. For the small faults found in the inspection, find out the reasons in time and try to eliminate or deal with them. If a minor fault cannot be eliminated or a major fault is found, it should be checked immediately.



I believe you have read the above shared content, and have a more understanding of the blower. I hope you can help us solve the problem in our life.